GSD-1002M - 8-Port 10/100/1000Mbps + 2-Port 100/1000X SFP Managed Desktop Switch

Overview

PLANET GSD-1002M is an 8-port 10/100/1000Mbps + 2-port 100/1000X SFP Managed Desktop Switch specially designed to build a reliable full Gigabit backbone to transmit and forward data to remote network through fiber optic. It provides 8-port 10/100/1000Base-T copper and 2 extra 100/1000Base-X SFP fiber optic interfaces with dual power system. Besides support for 20Gbps switch fabric to handle extremely large amounts of video, voice and important data in a secure topology, the GSD-1002M provides user-friendly but advanced IPv6 / IPv4 management interface and abundant L2 / L4 switching functions. It is the best investment for businesses/SOHOs expanding or upgrading their network infrastructure.

IPv6 / IPv4 Full-functioned Secure Switch The GSD-1002M is the ideal solution to fulfilling the demand of IPv6 management Gigabit Ethernet Switch. It supports both IPv4 and IPv6 management functions and can work with original network structure. It provides advanced Layer 2 to Layer 4 data switching and Quality of Service traffic control, Access Control List, network access control and authentication, and Secure Management features to protect building automation network connectivity with reliable switching recovery capability that is suitable for implementing fault tolerant and mesh network architectures. Spanning Tree Protocol and Dual Power Input for High Available Network System The GSD-1002M features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates Spanning Tree Protocol (802.1s MSTP), auto loop protection and dual power input system (PoE In + 12V DC) into customer’s automation network to enhance system reliability and uptime. In the example below, PoE power has failed with dropped cable and DC power will run hardware failover function automatically to keep powering the switch without any loss.

Handheld Size for FTTD Solution The GSD-1002M provides high-performance edge service and plug-and-play design for FTTD (Fiber to the Desktop) solutions. FTTD service is fiber optic cabling with reliable and expandable, lower-cost wiring architectures, and long distance capability. The GSD-1002M supports dual-speed, 100Base-FX and 1000Base-SX/LX SFP (Small Form-factor Pluggable) fiber-optic modules to connect fiber access point, with high flexibility to be installed in communication closet or major computer room for SMBs.

Features

Physical Ports

• 8 10/100/1000Mbps Gigabit Ethernet ports with auto-MDI/MDI-X supported
• 1 port (Port 8) supports 802.3af/at PoE 48~56V DC in-line power
• 2 100/1000Base-X mini-GBIC/SFP slots

Installation

• Dual Power Design
- 802.3af/at PoE In
- 12V DC power adapter acceptable

Layer 2 Features

• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
• Supports VLAN
- IEEE 802.1Q tagged VLAN
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Protocol VLAN
- Voice VLAN
- Private VLAN
- Management VLAN
- GVRP
• Supports Spanning Tree Protocol
- STP (Spanning Tree Protocol)
- RSTP (Rapid Spanning Tree Protocol)
- MSTP (Multiple Spanning Tree Protocol)
- STP BPDU Guard, BPDU Filtering and BPDU Forwarding
• Supports Link Aggregation
- IEEE 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (Static Trunk)
- Maximum 8 trunk groups, up to 8 ports per trunk group
• Provides Port Mirror (many-to-1)
• Loop protection to avoid broadcast loops

Quality of Service

• Ingress / Egress Rate Limit per port bandwidth control
• Storm Control support
- Broadcast / Unknown-Unicast / Unknown-Multicast
• Traffic classification
- IEEE 802.1p CoS
- TOS / DSCP / IP Precedence of IPv4/IPv6 packets
• Strict priority and Weighted Round Robin (WRR) CoS policies

Multicast

• Supports IGMP Snooping v2 and v3
• Supports MLD Snooping v1 and v2
• IGMP Querier mode support
• IGMP Snooping port filtering
• MLD Snooping port filtering

Security

• Authentication
- IEEE 802.1X Port-based network access authentication
- Built-in RADIUS client to co-operate with the RADIUS servers
- RADIUS / TACACS+ login user access authentication
• Access Control List
IPv4 / IPv6 IP-based ACL
MAC-based ACL
• MAC Security
- Static MAC
- MAC Filtering
• Port Security for Source MAC address entries filtering
• DHCP Snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
• IP Source Guard prevents IP spoofing attacks
• DoS Attack Prevention
• SSH / SSL

Management

• IPv4 and IPv6 dual stack management
• Switch Management Interface
- Web switch management
- Telnet Command Line Interface
- SNMP v1, v2c and v3
- SSH / SSL secure access
• User Privilege Levels Control
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
- Firmware upload/download via HTTP / TFTP
- Configuration upload / download through Web interface
- Hardware reset button for system reboot or reset to factory default
• SNTP Network Time Protocol
• Cable Diagnostics
• Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
• SNMP trap for interface Link Up and Link Down notification
• Event message logging to remote Syslog server
• Four RMON groups (history, statistics, alarms, and events)
• PLANET Smart Discovery Utility

Applications

Extending Network Infrastructure for SOHOs, SMBs and Workgroups Since port 8 of the GSD-1002M provides PoE PD power in-line and 12V DC in interface, it can obtain PoE power from any 802.3af/at PoE PSE equipment. The GSD-1002M is with non-blocking design and handheld size, and extends 8-port 10/100/1000Mbps Gigabit Ethernet and 2-port extra 100Base-FX / 1000Base-SX/LX SFP fiber-optic modules, bringing network infrastructure higher flexibility but lower in cost.

Plug-and-Play for FTTD Solution The GSD-1002M supports free configuration and free grounding, and provides high-performance edge service. To build the network infrastructure with an easily and quickly installed option, it can decrease attenuation and crosstalk issues for zero-loss data transfer.

Specifications