FT-806A20 10/100BASE-TX to 100BASE-FX (WDM TX:1310nm, SM,20km) Media Converter

£70.90

Stock: 5-7 Days
Model: FT-806A20
Weight: 0.60kg
Dimensions: 9.70cm x 6.90cm x 2.60cm
MPN: FT-806A20

Available Options

Mountings

Qty

Add to Cart Request A Quote

Ask Question

Add to Wish List Compare this Product

PLANET FT-806A20 is a Singlemode Single-Fibre WDM (SC) TX:1310nm Fast Ethernet Bridge 100BASE-FX Fibre to 10/100BASE-TX shielded twisted pair (STP) converter (WDM SC TX:1310nm, SM, 20km)

* Additional FT-806B20 (WDM TX:1550nm, SM) is required to run as a pair and must connect to the FT-806A20

It supports both half-duplex (412m) and full-duplex (20km) operation over Singlemode Single-Fibre Infrastructure. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fibre-optic interface. The fibre port of the converter operates at TX:1310nm and RX:1550nm uses an WDM SC Fibre Interface.

The FT-806A20 supports distances up to 20km using Singlemode Single-Fibre infrastructure.

The FT-806A20 features LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide an efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function.

LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fibre will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide an efficient solution to monitoring the net.

Please see other models in the FT-80x range if ST Fibre Interface or Multimode operation is required.

Other Single-mode models are available and can support distances up to 15/20/35/50/60km.

Compatible with the Planet MC-1500R , MC-1500 and MC-700 Rack Mountable Media Converter Chassis.

Complies with 10/100BASE-TX, 100BASE-FX IEEE 802.3, IEEE 802.3u standard

Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568

One fiber-optic, 1310nm wavelength

Data Transfer Rate: TP: 10/100Mbps FX: 100Mbps

Duplex mode support: 　

- Full or half-duplex mode by DIP switch (FX)

- Full or half-duplex mode by auto-negotiation (TP)

LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL

DIP switch - 2 DIP switches

- Rear DIP switch: FX duplex mode selection

- Side DIP switch: LFP (Link Fault Pass-through) mode selection

IEEE 802.3x Full-Duplex Flow-Control and Back-Pressure in Half-Duplex eliminate the loss of packets

Product

Protocol

IEEE 802.3, 10BASE-T

IEEE 802.3u, 100BASE-TX

IEEE 802.3u, 100BASE-FX

IEEE 802.3x, Flow Control

Dimensions (W x D x H)

9.7 x 6.9 x 2.6 cm

Weight

0.2kg (Boxed inc PSU 0.6kg)

Power Input

5V DC, 2A, max.

Power Supply

AC Adapter 100-240VAC Frequency: 50-60Hz

Enclosure

Compact-sized metal housing

Case with anti-corrosion treatment

Electrostatic paint

Connectors and Cables

Shielded Twisted-pair

RJ45, Category 5 (EIA/TIA 568)

Fibre-optic

WDM SC / Singlemode / Single-Fibre / 20km

Singlemode (SM) Cable

9/125

Optic Wavelength

TX: 1310nm; RX: 1550nm

Max. Launch Power (dBm)

-8

Min. Launch Power (dBm)

-14

Receive Sensitivity (dBm)

-31

Maximum Input Power (dBm)

Supports Distances and Functions

Shielded Twisted-Pair

100m (328 ft.)

Singlemode (SM) Fiber Optic

412m (1,350 ft.) (half-duplex)

20km (21 miles) (full-duplex)

Port Mode

TP: Half and full duplex, auto-negotiation

FX: Half and full duplex via DIP switch

Environment and Emissions

Operating Environment

Temperature: 0~50 degrees C

Humidity: 5~90% non-condensing

Storage Environment

Temperature: -40~70 degrees C

Humidity: 5~90% non-condensing

Emissions

FCC Class A, CE Class A

Standalone and Centralised Management Media Converter Installation

To meet the demand for the growing network, PLANET FT-806A20 has provided the advanced media conversion technology.

The FT-806A20 10/100Mbps (WDM SC, SM, Single-Fibre) media converter uses Singlemode Single-fibre infrastructure connectivity to meet different network applications.

It is very flexible for the FT-806A20 to work as a standalone device, point-to-point or can be installed into the central standard media converter chassis, such as the MC-700 / MC-1500 for providing centralised power.

The FT-806A20 is an ideal solution to building a network solution of FTTH (Fibre to the Home) or FTTC (Fibre to the Curb) and FTTB (Fibre to the Building) for ISPs, campuses and enterprises.

Tags: ft806a20

FT-806A20 10/100BASE-TX to 100BASE-FX (WDM TX:1310nm, SM,20km) Media Converter

Available Options

CONTACT

SERVICES

INFORMATION

LEGAL STUFF

FOLLOW US