CL1214E CopperLink Industrial High Speed Multi-Port Copper Ethernet Extender -168 Mbps

- Ethernet Extension— Extend 10/100Base-TX Ethernet well beyond its 100-meter limitation over a single unshielded twisted pair (UTP) or Cat 5e/6/7 cable.

- Industrial Grade - Operating temperature of -40 to 85°C and optional conformal coating to protect against condensing humidity.

Rate/Reach

Long Range Asymmetrical:

- 250 feet (73 m): Downstream (DS)]67 Mbps/Upstream (US) 16 Mbps 

 - 0,000 feet (3 km): DS 4 Mbps/US 263 kbps

Long Range Symmetrical: 

- 250 feet (73 m): DS 68 Mbps/ US 50 Mbps 

- 10,000 feet (3 km): DS 2.5 Mbps/US 1 Mbps

High Speed Asymmetrical: 

 - 250 feet (73 m): DS 168 Mbps/US 95 Mbps

 - 3,500 feet (1 km): DS 35 Mbps/US 1 Mbps

High Speed Symmetrical: 

- 250 feet (73 m): DS 121 Mbps/US 144 Mbps 

- 3,500 feet (1 km): DS 30 Mbps/US 4 Mbps

CopperLink Line Interface

- RJ-45 (pin 4 = ring; pin 5 = tip)

- Terminal block, 2-position

CopperLink Line Modulation

- DMT (Discrete Multi-Tone) 

Enclosure

- IP 40 rated • aluminum 

Ethernet Interface (x4)

- 8-position shielded RJ-45. Auto-sensing 10/100Base-TX with half or full duplex operation. 

Protocol

- Transparent to high layer protocols: supports 802.1Q VLAN tagged or untagged frames. Transparent to IP Video schemes: fully transparent to such compression schemes as MPEG-4, H.264, and MJPEG. 

Impulse Noise Protection Modes

- Selectable fast and interleave modes 

Target SNR Modes

- 6 dB & 9 dB 

Management

- 8-position DIP switch 

Monitoring

- 8 LEDs display Power, Link, Ethernet 1–4, Remote, and Local status. 

Power Supply

- External AC: 100–240 VAC 

- Internal DC: -12 VDC 

Compliance

- FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC 

Dimensions

15.74 (W) x 3.18 (H) x 12.07 (L) cm 

Weight

181 g 

A built-in 4-port Ethernet switch makes the CopperLink 1214E ideal for delivering multiple IP information streams over a single cable. For example, at a guardhouse or security kiosk, you could aggregate IP data from a laptop, a motion sensor, and two high resolution IP video cameras for simultaneous transmission over a single Ethernet connection. 

Combining data flows from up to four network-enabled devices onto a single twisted pair, the Model 1214E can deliver IP traffic up to 1.8 miles (3 km) away—well beyond the standard 100-meter Ethernet distance limitation. 

With achievable line rates up to 168 Mbps, the CopperLink 1214E eliminates the bandwidth constraints commonly experienced with other copper-based transmission technologies. The Model 1214E is engineered to re-use existing infrastructure previously employed in legacy applications including alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV. Many newer cabling standards are also supported, including Cat 5e, Cat 6, and Cat 7. 

RJ45 Line

CL1214E/EUI Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; RJ45 Connector; 100-240VAC