Menu
Your Cart

Model 2089 - RS-232 (EIA-574) to RS-485 Interface Converter

Model 2089 - RS-232 (EIA-574) to RS-485 Interface Converter
Model 2089 - RS-232 (EIA-574) to RS-485 Interface Converter

Available Options

Overview

The Model 2089 is Patton's first high speed EIA-574 (RS-232 on a DB-9) to RS-485 interface converter. Supporting async data rates to 115.2 kbps over one or two unconditioned twisted pair, the Model 2089 passes one control signal in each direction. The Model 2089 can handle up to 50 terminal drops in a multipoint polling environment; yet it is small enough to plug directly into a DB-9 serial port...and requires no AC power or batteries for operation. The Model 2089 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. Silicon Avalanche Diode surge protection is standard as well. Amazing!


Features

  • Fully Conforms to the EIA RS-485 Standard
  • Data Rates to 115,200 bps
  • Range Up to 9 Miles (14.5 Km)
  • No AC Power or Batteries Required
  • Up to 50 Terminal Drops in a Multipoint Polling Environment
  • 600 Watts of Silicon Avalanche Diode Surge Protection - Standard
  • Made in the USA — This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.

  • Specifications

    Transmission Format: Asynchronous
    Data Rate: Up to 115,200 bps
    Range: Up to 9 miles (14.5km)
    EIA-574 Interface: DB-9, male or female
    RS-485 Interface Options: RJ-11 or RJ-45 jack, terminal block with strain relief
    Transmit Line: 2, 4 wire unconditioned twisted pair
    Transmit Mode: 4-wire, full or half duplex; 2-wire half duplex
    Control Signals: DSR turns "ON" immediately after the terminal raises DTR; DCD turns "ON" after recognizing the receive signal from the line; CTS turns "ON" after the terminal raises RTS.
    RTS/CTS Delay: 0 or 8 msec
    Carrier: The carrier is switch selected either continuous operation or controlled by RTS
    Surge Protection: 600W power dissipation at 1 mS
    Power: Draws operating power from EIA-574 data and control signals; no AC power or batteries required.
    Temperature: 32° to 122° F (0° to 50° C)
    Size: 2.50" x 1.20" x 0.75" (6.4 x 3.0 x 1.9 cm)

    Ordering

    #Model #Description
    12089FRS232/RS485 CONVERTER, DB9F
    22089F RJ11RS232/RS485 CONVERTER,DB9F/RJ11
    32089F RJ45RS232/RS485 CONVERTER,DB9F/RJ45
    42089MRS232/RS485 CONVERTER, DB9M
    52089M RJ11RS232/485 CONVERTER,DB9M/RJ11
    62089M RJ45RS232/RS485 CONVERTER,DB9M/RJ45


     










    •Operates Actively or Passively
    •Data Rates from 50 bps to 19.2 kbps
    •Range to 4 Miles (6.4Km) over Two 24 AWG (.5mm) Twisted Pair
    •No AC Power Required; Draws Necessary Power for (Passive) Operation from RS-232 Interface
    •Optically Isolated on Line Side 
    •DB-25 Connectors on Both Ends
    •External DCE/DTE Switch
    •Two Units Work Together as Optically Isolated RS-232 Distance Extenders
    •Made in the USA — This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.
     

















        
        
        
     



       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       
       




     
      
      

     
      

     
      
      
      
      
      
      



       

    Interfaces: Asynchronous

    Transmit Line: 19 - 26 AWG (.9mm - .4mm)

    Range: 4 miles (6.4Km) on 24 AWG twisted pair

    Interfaces: EIA RS-232, CCITT V.24 (.5 mm) full duplex, 20mA current loop

    Data Rate: 50 - 19.2 Kbps

    Isolation: 2500V RMS via opto-isolators on line side

    Connectors: Male or female DB-25 on both sides

    Temperature Range: 0-50°C (32-122°F)

    Altitude: 0-15,000 feet (4.5Km)

    Humidity: Up to 95% non-condensing

    Power Supply: None required; uses power from NIC data signals

    Dimensions: 2.21" L x 0.8" H x 2.10" W (5.6 x 2.0 x 5.3 cm)

    Weight: 1.7 oz.