NV-600LI - Industrial VDSL2 CO Router
- Stock: 5-7 Days
- Model: NV-600LI
- MPN: NV-600LI
Saratota Suggest Kits
- NV-600LI (CO) / NV-600AI (CPE)
- NV-600LI (CO) / NV/600WI (CPE)
Overview
The NV-600LI/RI is our managed industrial Ethernet extension solution using the G.993.2 VDSL2 standard technology and providing up to 100Mbps symmetric using only a single copper wire pair that provides stable and reliable Ethernet transmission. Housed in metal DIN rail enclosures, these extenders are designed for harsh environments, such as industrial networking, intelligent transportation systems (ITS) and are also suitable for many military and utility market applications where environmental conditions exceed commercial product specifications. Wide operating temperature range models (-20 to 70 C) fulfill the special needs of industrial automation applications.
Flexible Configuration
The NV-600LI support two modes, one is Bridge mode, another is Router mode. Bridge mode is easy to install, and features a variety of packet can be directly pass through. Router mode is a router which networking device that forwards data packets between computer networks. Routers perform the "traffic directing" functions on the Internet. A data packet is typically forwarded from one router to another through the networks that constitute the internet work until it reaches its destination node.
Interleave delay support
Interleave delay function is used in digital data transmission technology to protect the transmission against noise issue and data error.
If during transit more than a certain amount of data has been lost then the data cannot be correctly decoded. Short bursts of noise on the line can cause these data packets to become corrupt and the bridge has to re-request data which in turn can slow down the overall rate at which data is transmitted.
Interleaving is a method of taking data packets, chopping them up into smaller bits and then rearranging them so that
once contiguous data is now spaced further apart into a non continuous stream. Data packets are re-assembled by your lan extender.
About harsh environment applications
The NV-600LI can used in the harsh environment, such as -20°C ~ 70°C (-4°F ~ 158°F), and metal case compliant with the IP-30 design. The design of the IP-30 can prevent the invasion of small stones within the NV-600LI.
Features
• Supports auto speed for Line port |
• Supports high bandwidth up to 100Mbps symmetric over line ports |
• Supports Web management (HTTP), TFTP |
• Supports uPnP/PPPoE/NAT/DHCP/DMZ/Firewall |
• Supports Router & Switch (Bridge) mode |
• Supports Loop back test |
• Supports SNMP v1/v2c/v3 |
• Supports SNR indicator for checking phone wiring quality |
• Supports Interleave Delay to prevent against noise and data errors |
• Supports 8a, 8b, 8c, 8d, 12a, 12b, 17a, 17b, and 30a band profile |
• Supports 997, 998 band plan |
• Provides surge protection |
• Supports power redundant and wide range dual power input(DC12V ~ 48V) |
• Supports Overload Current Protection |
• Supports wide range operating temperature(-20°C ~ 70°C) |
• Supports Reverse Polarity Protection |
• Supports alarm contact (relay output - 1 A @ 24 VDC) |
• Supports DIN-Rail mount installation |
• Metal case design and compliant with IP30 standard |
* Specifications are subject to change without prior notice. |
Applications
LAN Distance Extension
|
 |
Specifications
