NV-600AI - Managed Industrial VDSL2 CPE Router

Saratota Suggest Kits

• NV-600LI (CO)  / NV-600AI (CPE)
• NV-600LI (CO) / NV/600WI (CPE)
  

Overview

NV-600AI is an Industrial VDSL2 router equipped with four Gigabit LAN ports. It is compliant to ITU-T G.993.2  and G.993.5 standards and supports VDSL2 profile 30a that features 100Mbps of symmetric data. NV-600AI is perfectly suitable for triple-play applications. Housed in metal DIN rail enclosures, these routers are designed for harsh environments, such as industrial networking and utility market applications.

Vectoring Technology friendly Mode support

Vectoring is a transmission method that employs the coordination of line signals for reduction of crosstalk levels and improvement of performance. It is based on the concept of noise cancellation, much like noise-cancelling headphones. The ITU-T G.993.5 standard, "Self-FEXT cancellation (vectoring) for use with VDSL2 transceivers" (2010), also known as G.vector, describes vectoring for VDSL2. The scope of Recommendation ITU-T G.993.5 is specifically limited to the self-FEXT (far-end crosstalk) cancellation in the downstream and upstream directions. The far end crosstalk (FEXT) generated by a group of near-end transceivers and interfering with the far-end transceivers of that same group is cancelled. This cancellation takes place between VDSL2 transceivers, not necessarily of the same profile.

Easy Installation

The NV-600AI may be installed on any level surface (e.g. a table or shelf or rail) that use bracket or DIN rail plate. NV-600AI supports plug-and-play installation and is fully compatible with all kinds of network protocols. Furthermore, user can watch the status of each individual port via the LED indicators.

Enhanced Management

For efficient management, via Web interface, the NV-600AI can be programmed for advanced management functions such as QoS (Quality of Service)/DSCP, IEEE 802.1q Tag VLAN, SNMP v1/v2c/v3, IGMP v3 and enhanced security functions such as Packet filtering, DMZ, Mac Address based filtering, Parental Control, Application based filtering.

About harsh environment applications

The NV-600AI can used in the harsh environment, such as -20°C ~ 70°C (-4°F ~ 158°F), and metal case compliant with the IP-30 design. The design of the IP-30 can prevent the invasion of small stones within the NV-600AI.

Features

Applications

LAN Distance Extension The NV-600LI/NV-600AI acting as a standalone pair is good for Ethernet distance extension over existing telephone wires. With just one pair of AWG-24 copper wire, you can easily connect the maximum data rate of 100Mbps and up to 3km distance support. It is easy-to-use which do not requires installation of additional wiring. Every modular phone jack in the building can become a port on the LAN.

Specifications

* Specifications are subject to change without prior notice.