Menu
Your Cart

LRE-101 1-Port 10/100TX over UTP Long Reach Ethernet Extender

LRE-101 1-Port 10/100TX over UTP Long Reach Ethernet Extender
LRE-101 1-Port 10/100TX over UTP Long Reach Ethernet Extender

Easy Connection to Ethernet over UTP Extender

To fulfill the needs of long distance Ethernet connectivty over UTP or phone wire applications, PLANET Technology offers a new-generation Ethernet over UTP Extender, LRE-101. It features 1 x 10/100 BASE-TX RJ45 port and 1 x UTP RJ45 connector with a compact-sized metal housing, making the placement of the unit convenient. the LRE-101 provides a total duplex data rate of 100Mbps which can extend a maximum distance of up to 1.2km It is ideal for extending the distance and signal conversion by transmitting the Ethernet data from the UTP cable or Phone wire to another 100-meter UTP cable for any type of IP network device such as HD IP camera, wireless access point, NVR and digital signage.


IP Ethernet over Long Distance Existing UTP Cables


PLANET LRE-101 is also a Long Reach Ethernet (LRE) solution which provides a quick replacement and smooth migration solution from existing analogue system to full digital system. A normal UTP cable can only be extended up to 100 meters, but with the LRE-101, the distance for Ethernet networking can be extended up to 700 meters (Cat.5E UTP) and 1200 meters (Phone wire), which are ideal for the following network applications: 

- Long-distance IP network devices

- IP digital signage 

- Cable TV to IPTV

- Distance video education

- Electronic advertising boards

- Other applications 

If you have Cat.5E UTP cable or Phone wire in your existing environment, you can install a pair of the LRE-101 very simply without the need to build additional network wires, thus saving costs for network construction.


 Easy and Flexible Installation 


The LRE-101 offers two operation modes, the client-side “Slave “and central-side “Master”, making any network applications easy and flexible. The “Slave” or “Master” mode can be adjusted by using the built-in DIP switch. For point-to-point connection, one LRE-101 in “Slave” mode and the other one in “Master” mode must be set up as a pair of converters to perform the connection. This enables the administrator to efficiently manage the network over UTP cable, making long-distance transmission better. 


Low Power Consumption


The LRE-101 has a low power consumption of only 1.55 watts when in full operation.


Easy Chassis Installation


The LRE-101 Long Reach Ethernet Extender can be used as a stand-alone unit or as a slide-in module to the PLANET Media Converter Chassis (MC-700 and MC-1500 chassis series). The media chassis can assist in providing DC power to LRE-101.It can be DIN-rail or wall mounted for efficient use of cabinet space.


*** 2 x units required for 1-link / pair ***

Point-to-Point Application -- LAN to LAN Connection

One set (Pair) of the LRE-101 Extender could be used to link two local area networks that are located in different places. Through the Cat.5e UTP cable or Phone wire, it could set up a 100Mbps backbone, but one must be Master (CO mode) and the other one is Slave (CPE mode).


Community/Campus Surveillance and Security over IP

To take advantage of digital surveillance system and keep the benefits of UTP cable, the LRE-101 helps the community, campus and enterprises to upgrade analog camera system to IP camera surveillance without using additional new wires. The LRE-101 is a switching architecture with one RJ45 port and one Long Reach Ethernet interface. Just plug in the UTP cable of IP camera to Ethernet port and the existing UTP cable or Phone wire to the UTP connector to easily deploy and extend the distance with signal conversion by transmitting the Ethernet data from the standard UTP cable.

LAN Ethernet interface

1 x 10/100BASE-TX RJ45 Copper port, auto-negotiation / auto-MDI/MDI-X

Cabling:Cat5e UTP or above

Maximum Distance:100 meters

Maximum Frame Size:1522 bytes

Long Reach Interface

1  x RJ45 female Ethernet over UTP

Cabling:

Cat5e UTP or above

Telephone wire (RJ11)

Maximum Distance:

Max.800m with data transmission (RJ45)

Max.1200m with data transmission (RJ11)

Long Reach Ethernet Standard:IEEE 1901

Modulation Type:Wavelet-OFDM

Security:128-bit AES encryption

Frequency Band:2~28MHz


Performance*

Distance

RJ45


Data Rate

(Upstream/Downstream)

200m - 89/88Mbps

400m - 60/58Mbps

600m- 29/29Mbps

700m - 14/33Mbps


RJ11

(Upstream/Downstream)

200m - 81/80Mbps

400m - 59/52Mbps

600m - 52/44Mbps

800m - 28/22Mbps

1000m - 48/36 Mbps

1200m - 11/6 Mbps


Functionality

DIP Switch:Select Master (CO) or Slave (Remote - CPE) mode

Dimensions (W x D x H)

97 x 70.3 x 26 mm

Weight

189g

Housing

Metal

Power Requirement

5V DC, 2A external power

LED Indicators

 - Power: Green

- LAN : Green, 10/100Mbps LNK/ACT

- Long Reach: Green, LNK

- Master: Green


Standards Conformance

Standards Compliance

- IEEE 802.3/ 802.3u Ethernet standard compliant

- IEEE 802.3x Full-duplex flow control

- IEEE 802.1q Tag VLAN Transparent, Multicast pass-through

Regulatory Compliance

FCC Part 15 Class A, CE


Environment


Temperature

- Operating: 0~50 degrees C

- Storage: -10~70 degrees C

Humidity

- Operating: 5~95% (non-condensing)

- Storage: 5~95% (non-condensing)

- 10/100Mbps RJ45 port, auto-negotiation and half/full duplex mode

- Supports Phone wire and Cat.5E UTP cable or above

- Long distance Ethernet data transmission up to 1.2km

- Master/Slave mode selectable via DIP switch

- Maximum 1522 bytes packet size, IEEE 802.1Q VLAN tag transparent

- Advantage of minimum installation time (Simply by Plug-and-Play)

- Supports extensive LED indicators for network diagnosis

- Compact in size and easy to install

- Works with PLANET media converter chassis (MC-700/MC-1500/ MC-1500R/MC-1500R48)

Tags: lre101