GT-806A60 10/100/1000Base-T to 1000Base-LX (WDM TX:1310nm, SM,60km) Media Converter

Planet GT-806A60 10/100/1000Base-T to 1000Base-LX (WDM TX:1310nm, SM,60km) Media Converter

*  Additional GT-806B60 (WDM TX:1550nm, SM) is required to run as a pair and must connect to the GT-806A60

Providing the flexibility of 10/100/1000Mbps Ethernet Media via RJ-45 port and highly stable Gigabit fiber performance, PLANET GT-806A60 media converter support conversion between 10/100/1000Base-T and 1000Base-SX network.

The GT-806A60 has fixed WDM SC Fibre Interface connector and operates over Singlemode Single-Fibre infrastructure.

The Ethernet signal allows three types of segments to connect easily, efficiently and inexpensively.

Distance Extension with High Performance and Steady Network Communications

PLANET GT-806A60 gigabit media converter extends communications distance with highly Gigabit performance via fibre optic cable.

The GT-806A60 provides media conversion between 10/100/1000Base-T and 1000Base-LX interfaces such as WDM SC connectors  Singlemode Single-Fibre optic applications up to 60km

Enhanced Smart Management Features

The GT-806A60 provides auto MDI/MDI-X on its TP port and the DIP switch to configure the Link Fault Pass-through function (LFP). The LFP function includes the Link Loss Carry Forward (LLCF)/Link Loss Return (LLR). LLCF/LLR can immediately alarm administrators the problem of the link media and provide an efficient solution to monitoring the net. The DIP switch can disable or enable the LFP function. The LLCF means when a device connected to the converter and the TP line loses the link, the converter’s fiber will disconnect the link of transmission. The LLR (Link Loss Return) means when a device connected to the converter and the fibre line loses the link, the converter’s fibre will disconnect the link of transmission. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.

Moreover, Even the web UI is not available on GT-806A60, the network manager can still remotely control and monitor GT-806A60 by OAM TS-1000 terminal function such as remote failure indication, loop back test, port status, performance monitoring and troubleshooting.

Easy Installation

The GT-806A60 allows two types of the segment to connect easily. The GT-806A60 can be used as a standalone unit or point-to-point unit when powered by its DC adapter,  or it used as a slide-in module to Planet 19-inch 7-/15-slot media converter chassis (MC-700/MC-1500/ MC-1500R). These media chassis can assist in producing the power for the GT-806A60 to maintain the fiber-optic network at one location. As the Gigabit Media Converter fully complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T and IEEE 802.3z 1000Base-LX the Gigabit media conversion installation is quite quick and easy with its plug and play feature. The GT-806A15 also supports flow control and back pressure in half-duplex to eliminate packet loss.