Menu
Your Cart

IFT-802TS15 - 10/100Base-TX to 100Base-FX Industrial Media Converter - 15km

IFT-802TS15 - 10/100Base-TX to 100Base-FX Industrial Media Converter - 15km
IFT-802TS15 - 10/100Base-TX to 100Base-FX Industrial Media Converter - 15km
£99.00
  • Stock: 5-7 Days
  • Model: IFT-802TS15
  • MPN: IFT-802TS15

Overview

The IFT-80xT series is packaged in a compact IP-30 case that allows either DIN rail or panel mounting to have efficient usage of cabinet space. It provides an integrated power supply with a wide range of voltages for worldwide operation. It also offers dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.Easy Installation and Wide Range of Power Usages

PLANET IFT-80xT 10/100Base-TX to 100Base-FX Industrial Media Converter series efficiently converts data between 10/100Base-TX and 100Base-FX network. The IFT-80xT series provides the flexibility to all kinds of 10/100Mbps Ethernet Media on RJ-45 port and performs highly stable fiber performance.
Robust Media Converter Performance

allows the IFT-80xT series to be placed in almost any difficult environment.-40 to 75 degrees C PLANET 10/100Base-TX to 100Base-FX Industrial Media Converter IFT-80xT series extends communication distance with stable performance via fiber optic wire, in which the extended distance could be up to 2km with the IFT-802T, up to 15km with the IFT-802TS15 or up to 20km with the IFT-805AT (depending on SFP module). The IFT-80xT series is specifically equipped with durable components and strong housing case to operate reliably in electrically harsh and climatically demanding environments. The industrial level media converter provides a high level of immunity to electromagnetic interference and heavy electrical surges which are usually found on plant floors or traffic control cabinets on sidewalk. Being able to operate under the temperature range from Distance Extension with High Performance and Steady Network Communication

Features

• Automatic source address learning and aging• CSMA/CD Protocol
• Supports packet size of up to 1522bytes
• Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
• Features Store-and-Forward mode with wire-speed filtering and forwarding rates
• Store-and-Forward Switching Architecture
• Auto-MDI / MDI-X detection and auto negotiation in half-duplex / full-duplex modes for 10 /100Base-TX RJ-45 port
• Complies with the IEEE 802.3, IEEE 802.3u Fast Ethernet standard
Layer 2 Features

• DIN-rail and wall-mountable hardware design
• Free Fall, Shock and Vibration Stability
• Supports 6KV DC EFT protection for power line
• Supports 6KV DC Ethernet ESD protection
• Relay alarm for port breakdown
• IP30 metal case
• -40 to 75 degrees C operating temperature
• 12V to 48V DC, redundant power with polarity reverse protect function
Industrial Conformance

IFT-805AT• 1 Mini-GBIC slot, providing multi choice of SFP modules on
IFT-802TS15• 1 100Base-FX SC interface, providing long distance for 15km on
IFT-802T • 1 100Base-FX SC interface, providing long distance up to 2km on
• 1-port 10/100Base-T RJ-45 with auto negotiation and auto-MDI/MDI-X functionInterface

Applications


Transport Networking
PLANET’s Industrial Media Converter, IFT-80xT series, offers high reliability and security to guarantee the continuous industrial operation in harsh environments such as control cabinet of transportation, factory floors or and environments with extremely low or high temperature. In the industrial networking environments, each networked device is required to keep running continuously in the hazardous status. If industrial equipment fails to connect to the network, it might influence the entire operation of industrial systems and thus cause incredibly financial loss. With the IFT-80xT Industrial Media Converter, which complies with all the requirements of industrial applications, customers may enjoy high reliability, fast recovery capability, and safe Ethernet network operation.
 
 
Fiber-optic Networking for ISPs, Enterprises, and Homes
With stable performance of data transmission and easy installation, the IFT-80xT Industrial Media Converter series can build an ISP network solution of FTTH (Fiber to the Home), FTTC (Fiber to the Curb) for ISPs, or FTTB (Fiber to the Building) for enterprises with small office network environment.


Specifications


Hardware Specifications
10/100Base-TX Port1 RJ-45 auto-MDI / MDI-X port
100Base-FX PortIFT-802T: 1 SC interface
IFT-802TS15: 1 SC interface
IFT-805AT: 1 SFP slot
Fiber Port Type IFT-802T: SC / multi-mode
IFT-802TS15: SC / single-mode
IFT-805AT: Vary on module
Cable Distance IFT-802T: 2km
IFT-802TS15: 15km
IFT-805AT: Vary on module
Optical Frequency IFT-802T: 1310nm
IFT-802TS15: 1310nm
IFT-805AT: Vary on module
Launch Power (dBm) Max
IFT-802T: -14
IFT-802TS15: 0

Min
IFT-802T: -20
IFT-802TS15: -20

Vary on module
IFT-805AT
Receive Sensitivity (dBm) IFT-802T: -32
IFT-802TS15: -32
IFT-805AT: Vary on module
Maximum Input Power (dBm) IFT-802T: -14
IFT-802TS15: 0
IFT-805AT: Vary on module
Dimensions (W x D x H) 135 x 85 x 32 mm
Weight 430g
Installation DIN rail kit and wall mount ear
Maximum Frame Size 1522bytes packet size
Flow Control Back pressure for half duplex, IEEE 802.3x pause frame for full duplex
Enclosure IP-30 slim type metal case
LED Indicator System:
 •Power 1 (Green)
 •Power 2 (Green)
 •Fault (Green)
1 x copper port:
 •10/100 (Green)
 •LNK/ACT (Green)
1 x 100FX port:
 •100 (Green)
 •LNK/ACT (Green)
Power Input 12 to 48V DC redundant power with polarity reverse protection function
Power Consumption 3 watts/ 10BTU (maximum)
Protection ESD (Ethernet): 6KV DC
Surge (Power): 6KV DC
Speed Twisted-pair:
 •10/20Mbps for half / full-duplex
 •100/200Mbps for half / full duplex
Fiber-optic:
 •200Mbps for full-duplex
Network cables 10/100Base-TX:
 •2-pair UTP Cat. 3, 4, 5 (100 meters, max.)
 •EIA/TIA-568 100-ohm STP (100 meters, max.)
100Base-FX:
 •IFT-802T: Multi-mode optical fiber 62.5/125μm / 50/125μm (2km)
 •IFT-802TS15: Single-mode optical fiber 9/125μm (15km)
 •IFT-805AT: SFP slot (depending on SFP module)
Standards Conformance
Emissions FCC Class A, CE Class A
Standards Compliance IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX / 100Base-FX
IEEE 802.3x flow control and back pressure
Stability Testing IEC60068-2-32 (Free Fall)
IEC60068-2-27 (Shock)
IEC60068-2-6 (Vibration)
Environment
Operating Temperature -40~75 degrees C
Operating Humidity 5~90% non-condensing
Storage Temperature -40~85 degrees C
Storage Humidity 5~90% non-condensing



Tags: ift802ts15